Alcatel-Lucent 7710 SR Configuration Manual page 51

...
----------------------------------------------
A:ALA-48>config>router>mpls#
Parameters
detail — Displays all configuration parameters including parameters at their default values.
logout
Syntax logout
Context <GLOBAL>
Description This command logs out of the router session.
When the logout command is issued from the console, the login prompt is displayed, and any log IDs
directed to the console are discarded. When the console session resumes (regardless of the user), the
log output to the console resumes.
When a Telnet session is terminated from a logout command, all log IDs directed to the session are
removed. When a user logs back in, the log IDs must be re-created.
mrinfo
Syntax mrinfo ip-address [router router-instance]
Context <GLOBAL>
Description
This command is used to print relevant multicast information from the target multicast router. Infor-
mation displayed includes adjacency information, protocol, metrics, thresholds, and flags from the
target multicast route
Parameters
ip-address — Specify the ip-address of the multicast capable target router.
router router-instance — Specify the router name or service ID.
7710 SR OS Basic System Configuration Guide
primary "to-NYC"
hop-limit 50
adaptive
no include
no exclude
record
record-label
no bandwidth
no shutdown
exit
no shutdown
exit
Values
router-name:
service-id:
Default Base
Base , management
1 — 2147483647
Basic CLI Commands
Page 51