Nmi Menu - Sagem -LINK F Installation And Operation Manual

SAGEM-LINK F
Installation and Operation Manual
Open configuration tab of the NMI card configuration menu (see next section), and check agent and
checksum versions.
Select new agent to activate and confirm by clicking on the restart button to load the new agent.

3.3.6 - NMI Menu

This menu is used only when the equipment is part of a network managed by a SNMP manager.
With this menu, it is possible to configure the network management function, and to download a new
NMI software.
When clicking on the NMI menu, the following windows appears :
3.3.6.1 - NMI Card Configuration Menu
NMI Card Configuration – Environment Tab
Click on the Card Configuration /local or remote configuration menu. The following screen appears :
Check box to change software
Version and restart
Available NMI Boot and Agent versions are indicated in this first screen, with the specific Ethernet
address.
From this screen it is possible to reset NMI software and to activate the second agent version if
necessary.
Reproduction and communication prohibited without the written permission of Sagem Communication
Click here to reset NMI software
288055571-04
Page 82/142
Issue 04 : July 2005