SAGEM-LINK F
Installation and Operation Manual
For advanced users who may want to remove this confirmation, use the menu Configuration /
Settings and uncheck "Always confirm choice"
While transmitter is still in mute position, change if necessary :
•
Transmit frequency by moving the cursor on the slide
or right buttons, and validate
•
Capacity
Click here to modify current Capacity
Select capacity and validate
Note : as capacity ranges are not the same in QPSK mode (2xE1, 4xE1, 8xE1 or 16xE1) than in
16QAM mode (8xE1 or 16xE1), it should be necessary to change first modulation then capacity or the
opposite depending on the current and target configurations.
•
Modulation (only if 16QAM option is installed) : click on the modulation button (toggle between
QPSK and 16QAM.
Reproduction and communication prohibited without the written permission of Sagem Communication
Click here to modify current
modulation scheme
288055571-04
, or by clicking on the left
Page 53/142
Issue 04 : July 2005