No Remote Radio; Rsl Alarms; Transmit Power Alarm - Sagem -LINK F Installation And Operation Manual

SAGEM-LINK F
Installation and Operation Manual
4.6.3 – No Remote Radio
The local radio is operating, but there is no communication with the remote terminal : verify
remote terminal configuration, antenna alignment, radio path obstructions.
4.6.4 – RSL Alarms
The link is established with a too low receive level causing RSL alarm. Check antenna alignment,
or a propagation problem.
4.6.5 – Transmit Power alarm
The link is established with a RSL alarm only on one side of the link. Check
configuration.
Reproduction and communication prohibited without the written permission of Sagem Communication
288055571-04
transmit power
Page 103/142
Issue 04 : July 2005