Sagem -LINK F Installation And Operation Manual page 74

SAGEM-LINK F
Installation and Operation Manual
Once all parameters have been defined SAGEM LINK F Pilot will proceed to a new record. If a
previous file monitor.log already exists, the Pilot will ask to save it or to delete it automatically by
overwriting it.
3.3.3.3 - View Equipment Event Log
This log does not require to have the PC connected during measurement. All information is stored in
the SAGEM-LINK F RAM. The information is available as long as SAGEM-LINK F is powered.
This feature does not work like monitor log : in order to limit the amount of information stored, only
event changes are recorded.
Memory capacity allows to store the 1000 last events. This system works in complement with the
monitor log as it is able to store the event when it occurs.
To access to this menu click on the menu "Monitoring / View Eqp Log / Local (or Remote)"
Reproduction and communication prohibited without the written permission of Sagem Communication
Tributary Alarms
Click here to define the
time interval
Setting the time interval and the quality parameters
288055571-04
Page 74/142
Issue 04 : July 2005