Sagem -LINK F Installation And Operation Manual page 70

SAGEM-LINK F
Installation and Operation Manual
Cable Interface (modem) Alarms
Demodulation : This alarm is generated if there is a demodulator fault or if received data is not
Modulation : This alarm is generated if there is modulator fault. When a modulation alarm
NMI (Network Management Interface) Alarms
Eth : This alarm is generated in case of a hardware failure regarding NMI Ethernet interface
ICC : This alarm is generated if there is a communication problem between the Network
MGMT1 : This alarm is generated in case of a communication problem on MGMT1 serial port.
MGMT2 : This alarm is generated in case of a communication problem on MGMT2 serial port.
TSL2 : This alarm is generated in case of a communication problem between the two IDUs of
Reproduction and communication prohibited without the written permission of Sagem Communication
recovered.
occurs, the transmitter is muted.
management agent and the IDU microprocessor.
the link (when the link is broken for instance).
288055571-04
Page 70/142
Issue 04 : July 2005