SAGEM-LINK F
Installation and Operation Manual
Type the registration code in the box.
In case of the code does not match, an error message is provided and the operation is cancelled.
Once the code accepted, the system works in the full capacity range : 2x2/4x2/8x2/16x2 Mbit/s.
To verify that the equipment is now working at all data rates go again to the menu Parameters / Read IDU
Parameters / Local to check available capacities :
Reproduction and communication prohibited without the written permission of Sagem Communication
288055571-04
Full
capacity
range
Page 140/142
Issue 04 : July 2005