11.3 Service Menu Setting/Adjustment; Serial Number; Firmware Version; Alignment - Konica Minolta magicolor 7450 Service Manual

Field Service Ver. 1.0 May 2006

11.3 SERVICE MENU Setting/Adjustment

11.3.1

SERIAL NUMBER

Function • Displays the serial number of the printer.
Use • To confirm the printer's serial number.
Setting 1. Select [SERVICE MENU] and press the MENU/SELECT key.
/procedure 2. Select [SERIAL NUMBER] and press the MENU/SELECT key.
3. The serial number of the printer is displayed.
11.3.2

FIRMWARE VERSION

Function • Displays the version number of the printer firmware.
• To use when the firmware is updated.
• To confirm the version number of the printer firmware.
Use CONTROLLER F/W: Firmware of controller
ENGINE F/W
BOOT/F/W
Setting 1. Select [FIRMWARE VERSION] and press the MENU/SELECT key.
/procedure 2. Select desired firmware and press the MENU/SELECT key.
3. Version number of firmware is displayed.
11.3.3

ALIGNMENT

A. TOP ADJUSTMENT
Function • Adjusts the top margin of media for single-sided printing.
• To correct a misaligned print image.
PLAIN PAPER
THICK1
Use THICK2
THICK3
ENVELOPE
TRANSPARENCY: Adjust the head margin of transparency.
Setting 1. Select [TOP ADJUSTMENT] and press the MENU/SELECT key.
/procedure 2. Select desired paper type and press the MENU/SELECT key.
3. Select desired adjustment amount with the Up key /Down key
MENU/SELECT key.
• The default setting is "0."
: Firmware of engine
: Boot firmware
: Adjust the head margin of plain paper.
: Adjust the head margin of thick paper 1.
: Adjust the head margin of thick paper 2.
: Adjust the head margin of thick paper 3.
: Adjust the head margin of envelope.
-15 to +15 (1 step: 0.1 mm)
11. SERVICE MENU
and press the
149