Konica Minolta magicolor 7450 Service Manual page 182

Field Service Ver. 1.0 May 2006
G. FUSER LOOP ADJ
Functions • To vary the timing to start fusing loop processing and adjust the fusing loop size at
Envelope printing.
Use • To be used when paper wrinkle or transfer misalignment occur at Envelope printing.
Adjustment • The default setting is 0.
Range
Adjustment Adjustment in +: Delay the timing to start fusing loop processing
Instructions Adjustment in -: Put ahead the timing to start fusing loop processing
Setting/ 1. Select [FUSER LOOP ADJ] and press the MENU/SELECT key.
Procedure 2. Select desired setting value with the Up key /Down key
SELECT key.
"0" (-2 to +2)
and press the MENU/
9. Menu
145