Service Menu (magicolor 5450)
8.3
Service Menu Setting/Adjustment
8.3.1
SERIAL NUMBER
Function
• Displays the serial number of the printer.
Use
• To determine the printer's serial number.
Setting
1. Select "SERVICE MENU" and press the MENU/SELECT key.
/procedure
2. Select "SERIAL NUMBER" and press the MENU/SELECT key.
3. "SERIAL NUMBER" is displayed.
8.3.2
FIRMWARE VERSION
Function
• Displays the version number of the printer firmware.
Use
• To determine the version number of the printer firmware.
Setting
CONTROLLER F/W: Firmware of controller
/procedure
ENGINE F/W: Firmware of engine
BOOT/F/W: Boot firmware
1. Select "FIRMWARE VERSION" and press the MENU/SELECT key.
2. Select "Desired firmware" and press the MENU/SELECT key.
3. Version number of firmware is displayed.
8.3.3
ALIGNMENT
A. TOP ADJUSTMENT
Function
• Adjusts the top margin of media for single-sided printing.
Use
• To correct a misaligned print image.
Setting
PLAIN PAPER: Adjust the head margin of plain paper.
/procedure
THICK PAPER: Adjust the head margin of thick paper.
ENVELOPE: Adjust the head margin of envelope.
TRANSPARENCY: Adjust the head margin of transparency.
1. Select "ALIGNET" and press the MENU/SELECT key.
2. Select "TOP ADJUSTMENT" and press the MENU/SELECT key.
3. Select "Desired paper type" and press the MENU/SELECT key.
4. Select "Desired adjustment amount" with the Up key /Down key
MENU/SELECT key.
• The default setting is "0."
"-15" to "+15". (31 steps)
3-80
Main Unit Field Service
and press the