Clock; Hdd Format - Konica Minolta magicolor 7450 Service Manual

9. Menu
9.8.12

CLOCK

A. DATE
Function • Sets the date of the printer's built-in clock.
Use • To change the date of the printer's built-in clock.
Setting DATE (DD.MM.YY): For Europe
/procedure DATE (MM.DD.YY): For North America
DATE(YY.MM.DD): For Japan, Asia, China
The following shows how to set DATE (DD.MM.YY).
1. Select [CLOCK] and press the MENU/SELECT key.
2. Select [DATE (DD.MM.YY)] and press the MENU/SELECT key.
3. Set date with the Up key /Down key
4. Repeat the above procedures to set month and year.
5. Press the MENU/SELECT key.
DD : 01 to 31
MM : 01 to 12
YY : 2005 to 2032
B. TIME
Function • Sets the time of the printer's built-in clock.
Use • To change the time of the printer's built-in clock.
Setting 1. Select [CLOCK] and press the MENU/SELECT key.
/procedure 2. Select [TIME] and press the MENU/SELECT key.
3. Set hour with the Up key /Down key
4. Repeat the above procedures to set Minute.
5. Press the MENU/SELECT key.
9.8.13

HDD FORMAT

Function • Initializes the format of the optional Hard Disk Kit.
• To initialize the format of the optional Hard Disk Kit.
Use USER AREA ONLY : Initialize only user area
ALL
Setting 1. Select [HDD FORMAT] and press the MENU/SELECT key.
/procedure 2. Select desired initialization method and press the MENU/SELECT key.
3. [ARE YOU SURE?] is displayed.
4. By pressing the MENU/SELECT key, initialization starts. By pressing the CANCEL
key without pressing the MENU/SELECT key, the start of initialization can be can-
celled.
5. The printer restarts and the hard disk is initialized. Once the initialization starts, it
cannot be cancelled.
• The default setting is USER AREA ONLY.
NOTE
• This menu is available only when an optional Hard Disk Kit is installed.
130
: Initialize all area
USER AREA ONLY
Field Service Ver. 1.0 May 2006
and press the Right key .
and press the Right key .
ALL