Konica Minolta magicolor 7450 Service Manual page 71

5. Firmware upgrade
10. Then the firmware upgrade starts. Wait until all the upgrade procedure is complete.
NOTE
• Never turn the printer Power Switch OFF and ON while the firmware is being
upgraded.
11. After the firmware upgrade is complete, [FIRMWARE UPDATE TO CONTINUE TURN
OFF THEN ON] is displayed.
12. Turn the printer's Main Switch OFF and then ON.
13. After the printer has restarted, check that a [READY] message is displayed.
14. From the Menu, select [PRINT MENU] → [CONFIGURATION PG] and execute the
function. Then, check that the firmware [2] has been upgraded.
See P.101
PRINTER INFORMATION
DATE
TIME
CONTROLLER F/W
ENGINE F/W
BOOT F/W
TOTAL PAGE COUNT
SERIAL NUMBER
34
FIRMWARE UPDATE
WRITING DATA XX%
FIRMWARE UPDATE
TO CONTINUE
TURN OFF THEN ON
MM.DD.YYYY
HH.MM
403930G0120000(US)
403950F0150000(US)
403999G0110000
7
******
Field Service Ver. 1.0 May 2006
4138F2C010DA
4138F2C011DA
[2]
4039F2C519DA