8. Description of the Control Panel
8.1.6
Service Call messages
These messages are displayed when error(s) that cannot be handled by the user occur.
The "Error LED
" turns ON while the message is displayed on the Control Panel.
The "Ready LED
" on Control Panel turns OFF while an Service Call message is dis-
played on the Control Panel.
The Control Panel displays the following description at Service Call.
Display
LCD 1 A "Warning icon
are displayed on the right (for example, SERVICE CALL C002).
LCD 2
The error description is displayed (for example, RAM ERROR).
LCD 3
LCD 4 No display
• A printer icon is displayed with a flashing "Warning icon
• A Service Call detected during start-up of the printer is displayed as shown in the bottom
of the following picture.
Warning icon
Error message
State
Error message
• For the details of each item, see "Service Call messages."
See P.93
86
Description
" is displayed and the Service Call message and a 4-digit-Service Call ID
SERVICE CALL C002
RAM ERROR
SERVICE CALL C002
RAM ERROR
Field Service Ver. 1.0 May 2006
."
State
Warning icon
Printer icon
4039F3E517DA
4138F3E019DA