Duplex; Copies - Konica Minolta magicolor 7450 Service Manual

9. Menu
(2) LOGICAL TRAY0-9
Function • Specifies whether jobs received from another manufacturer's printer driver are
printed using Tray 1 to Tray 5.
Use • To specify the media source for print jobs using another manufacturer's printer driver.
Setting • Only the default for LOGICAL TRAY 1 is PHYSICAL TRAY 1. PHYSICAL TRAY 2 is
/procedure the default for all trays other than LOGICAL TRAY 1.
PHYSICAL TRAY 3
NOTE
• Only the mounted Tray can be selected.
9.4.2

DUPLEX

Function • Sets duplex printing mode.
• To specify duplex printing.
OFF
Use
LONG EDGE
SHORT EDGE : Duplex print is ON, short edge
Setting • The default setting is "OFF."
/procedure
NOTE
• This menu is available only when a Duplex Option is installed.
• The setting in the printer driver overrides the setting in this menu.
9.4.3

COPIES

Function • Sets the number of prints.
Use • To specify the number of copies of the job to be printed.
Setting 1. Select [COPIES] and press the MENU/SELECT key.
/procedure 2. Select desired print number with the Up key /Down key
SELECT key.
• The default setting is "1" copy.
"1" copy to 9999 copies.
NOTE
• The setting in the printer driver overrides the setting in this menu.
108
PHYSICAL TRAY 1
PHYSICAL TRAY 4
: Duplex print is OFF
: Duplex print is ON, long edge
"OFF" LONG EDGE
Field Service Ver. 1.0 May 2006
"PHYSICAL TRAY 2"
PHYSICAL TRAY 5
SHORT EDGE
and press the MENU/