Konica Minolta magicolor 7450 Service Manual page 61

3. Periodical check
[1]
[3]
[2]
[4]
24
4039F2C501DA
4039F2C502DA
[5]
4039F2C503DA
Field Service Ver. 1.0 May 2006
B. Reinstallation Procedure
1. Hold the Imaging Unit [1] with both
hands and tilt it to the left as shown
on the illustration.
Shake it twice lightly. Tilt it to the
right and shake it twice again lightly.
2. Take the Imaging Unit [2] out from
the black plastic bag [3].
3. Peel off the Tape [4] so that the
Mounting Bracket [5] can be
removed. Then, remove the Mount-
ing Bracket [5].
NOTE
• Since the Imaging Unit is highly
susceptible to light, keep it
shielded from light up to the time it
is installed.
• Carefully unseal the plastic bag
(black).
• If the Imaging Unit is packed in the
plastic bag (black) again, seal the
package using tape or another
means.