Konica Minolta magicolor 7450 Service Manual page 126

Field Service Ver. 1.0 May 2006
B. Warning messages
Message
Priority
(LCD2/LCD3)
UNABLE TO
High 1
COLLATE JOB
HDD
2
NEAR FULL
MEMORY CARD
3
NEAR FULL
I-UNIT END
4
X
TONER EMPTY
5
X
I-UNIT LIFE
6
X
TRANS. BELT
7
END OF LIFE
FUSER UNIT
8
END OF LIFE
WASTE TONER
9
NEAR FULL
TONER LOW
10
X
I-UNIT LOW
11
X
UNKNOWN PAPER
12
TRAY X
PAPER EMPTY
13
TRAY X
INCORRECT
14
TONER X
INCORRECT
15
I-UNIT X
ILLEGAL
16
INSTALLATION
NON SUPPORT
17
CARD
INCORRECT
18
HDD
INCORRECT
Low 19
MEMORY CARD
Print in sets disabled (Full hard disk)
(This warning message is also displayed during printing.)
The hard disk space will run out soon.
The compact flash space will run out soon.
Service life of the Imaging Unit (X) has been reached. (END status)
• Executing the color printing with one of YMCK being at the END will
make the Operator Call.
Toner (X) is empty.
• Executing the color printing with one of YMCK being empty will
make the Operator Call.
Service life of the Imaging Unit has been reached.
• Printing is available until the END status when the [IMAGING UNIT
LIFE] is set to [CONTINUE] on MENU.
When it is set to [STOP], executing the color printing with one of
YMCK having been reached its service life will make the operator
call.
• Monochrome printing is available unless the Imaging Unit K reached
its service life. (but not under warranty)
Transfer Belt Unit service life has been reached.
Fusing Unit service life has been reached.
The Waste Toner Bottle needs replacement soon.
The specified color toner cartridge will run out soon.
The specified color Imaging Unit will run out soon.
Paper which size cannot be automatically detected has been inserted.
No media in the specified Tray.
The specified tray is not installed, but it is set in the printer driver.
The specified color toner cartridge is not the correct type.
A print cycle can be initiated, but is run at 1/3 the normal print speed.
The specified color Imaging Unit is not the correct type.
The Compact Flash card has been inserted into the card slot after ini-
tialization is completed.
The Compact Flash card will be invalid.
A Compact Flash card which is inserted is not supported.
The Compact Flash card will be invalid.
A Hard Disk which was formatted by other unit is installed.
A Compact Flash card which was formatted by other unit is installed.
8. Description of the Control Panel
Description
89