Replacing The Tray 1 Feed Roller (Bypass) - Konica Minolta magicolor 7450 Service Manual

3. Periodical check
[4]
[7]
[5]
3.4.3

Replacing the Tray 1 Feed Roller (Bypass)

[2]
14
3. Take off the rubber stopper [3], shaft
[4], spring [5], and guide plate [6] to
remove the Tray 2 Separation Roller
[6]
fixing bracket Assy [7].
[3]
4038F2C003DB
4. Snap off the E-ring [8] and the Tray 2
[9]
Separation Roller Assy [9].
5. To reinstall, reverse the order of
removal.
[8]
NOTE
• Replace the Tray 2 Feed Roller
(Standard) and Tray 2 Separation
Roller at the same time.
4037F2C509DA
1. Remove the Multi Bypass Unit.
See P.57
2. Snap off the E-ring [1], and remove
Tray 1 Paper Feed Clutch [2].
[1]
4038F2C004DA
3. Remove the Gear [3].
[3]
4038F2C005DA
Field Service Ver. 1.0 May 2006