Collate; Quality Menu; Color Mode; Brightness - Konica Minolta magicolor 7450 Service Manual

Field Service Ver. 1.0 May 2006
9.4.4

COLLATE

Function • Sets printing in sets.
• To print several sets of multiple pages.
Use ON : Print in sets.
OFF : Print in page.
Setting • The default setting is OFF.
/procedure
NOTE
• This menu is available only when an optional Hard Disk Kit is installed.
• The setting in the printer driver overrides the setting in this menu.
9.5

QUALITY MENU

9.5.1

COLOR MODE

Function • Sets the color mode for printing.
Use • To specify whether jobs should be printed in color or grayscale.
Setting • The default setting is COLOR.
/procedure
9.5.2

BRIGHTNESS

Function • Sets the brightness of the printed image.
Use • To adjust the brightness of the printed image.
Setting • The default setting is 0 %.
/procedure
-15 %
9.5.3

PCL SETTING

A. CONTRAST
Function • Sets the contrast of a PCL printed image.
Use • To adjust the contrast of a PCL printed image.
Setting • The default setting is 0%.
/procedure
-15 %
B. IMAGE PRINTING
(1) RGB SOURCE
Function • Sets the RGB color space of the image to be printed.
• To set the input RGB color space that is used for printing the image (picture).
Use sRGB
DVICE COLOR : It uses the Device color in the color space.
Setting • The default setting is sRGB.
/procedure
ON
"COLOR"
-10 % -5 % "0 %"
-10 % -5 % "0 %"
: Profile that has been preset to the printer.
DEVICE COLOR
"OFF"
GRAYSCALE
+5 % +10 % +15 %
+5 % +10 % +15 %
"sRGB"
9. Menu
109