Konica Minolta magicolor 7450 Service Manual page 204

Field Service Ver. 1.0 May 2006
(5) HALF TONE 64
Functions • Prints the halftone pattern with 25 % level for CMYK respectively.
Use • To check the unevenness of the density and the pitch.
Setting/ 1. Set the A3 or 11 x 18 paper on the Tray.
Procedure 2. Select [HALF TONE 64] and press the MENU/SELECT key.
3. Select desired color with the Up key /Down key
key.
4. Select [PRINT] and press the MENU/SELECT key.
(6) HALF TONE 128
Functions • Prints the halftone pattern with 50 % level for CMYK respectively.
Use • To check the unevenness of the density and the pitch.
Setting/ 1. Set the A3 or 11 x 18 paper on the Tray.
Procedure 2. Select [HALF TONE 128] and press the MENU/SELECT key.
3. Select desired color with the Up key /Down key
key.
4. Select [PRINT] and press the MENU/SELECT key.
(7) HALF TONE 256
Functions • Prints the halftone pattern with 100 % level for CMYK respectively.
Use • To check the unevenness of the density and the pitch.
Setting/ 1. Set the A3 or 11 x 18 paper on the Tray.
Procedure 2. Select [HALF TONE 256] and press the MENU/SELECT key.
3. Select desired color with the Up key /Down key
key.
4. Select [PRINT] and press the MENU/SELECT key.
(8) GRADATION
Functions • Prints the Gradation pattern.
Use • To check the gradation reproductively.
Setting/ 1. Set the A3 or 11 x 18 paper on the Tray.
Procedure 2. Select [GRADATION] and press the MENU/SELECT key.
3. Select [PRINT] and press the MENU/SELECT key.
B. FUNCTION MENU
(1) TRAY1 ADJ-MIN
Functions • To set the minimum width for the Manual Bypass Paper Size Unit of the Manual
Bypass Guide.
Use • Use when the Manual Bypass Paper Size Unit of the Manual Bypass Guide has been
changed.
• Use when a false paper size is displayed when the Tray 1 is used.
Setting/ 1. Select [TRAY1 ADJ-MIN] and press the MENU/SELECT key.
Procedure 2. Load the Tray 1 with paper having a width of 90 mm or 3.55 inches.
3. Select [EXECUTE] and press the MENU/SELECT key.
11. SERVICE MENU
and press the MENU/SELECT
and press the MENU/SELECT
and press the MENU/SELECT
167