To do...
Enter system view
Enter OSPFv3 view
Enter OSPF area view
Apply an IPsec policy on a
virtual link
NOTE:
An IPsec policy used for OSPFv3 can only be in manual mode. For more information, see
Configuration Guide
Displaying and maintaining OSPFv3
To do...
Display OSPFv3 process brief
information
Display OSPFv3 interface
information
Display OSPFv3 LSDB information
Display OSPFv3 LSDB statistics
Display OSPFv3 neighbor
information
Display OSPFv3 neighbor statistics
Display OSPFv3 routing table
information
Display OSPFv3 area topology
information
Display OSPFv3 virtual link
information
Display OSPFv3 next hop
information
Use the command...
system-view
ospfv3 [ process-id ]
area area-id
vlink-peer router-id [ hello seconds |
retransmit seconds | trans-delay seconds
| dead seconds | instance instance-id |
ipsec-policy policy-name ] *
.
Use the command...
display ospfv3 [ process-id ] [ | { begin | exclude |
include } regular-expression ]
display ospfv3 interface [ interface-type
interface-number | statistic ] [ | { begin | exclude |
include } regular-expression ]
display ospfv3 [ process-id ] lsdb [ [ external |
inter-prefix | inter-router | intra-prefix | link | network
| router | grace ] [ link-state-id ] [ originate-router
router-id ] | total ] [ | { begin | exclude | include }
regular-expression ]
display ospfv3 lsdb statistic [ | { begin | exclude |
include } regular-expression ]
display ospfv3 [ process-id ] [ area area-id ] peer
[ [ interface-type interface-number ] [ verbose ] |
peer-router-id ] [ | { begin | exclude | include }
regular-expression ]
display ospfv3 peer statistic [ | { begin | exclude |
include } regular-expression ]
display ospfv3 [ process-id ] routing [ ipv6-address
prefix-length | ipv6-address/prefix-length | abr-routes
| asbr-routes | all | statistics ] [ | { begin | exclude |
include } regular-expression ]
display ospfv3 [ process-id ] topology [ area area-id ] [ |
{ begin | exclude | include } regular-expression ]
display ospfv3 [ process-id ] vlink [ | { begin | exclude
| include } regular-expression ]
display ospfv3 [ process-id ] next-hop [ | { begin |
exclude | include } regular-expression ]
295
Remarks
—
—
—
Required
Not configured by default
Security
Remarks
Available in
any view