To do...
Display OSPF ABR and ASBR
information
Display OSPF interface information
Display OSPF error information
Display OSPF ASBR
summarization information
Display the global router ID
Reset OSPF counters
Reset an OSPF process
Re-enable OSPF route
redistribution
OSPF configuration examples
NOTE:
These examples only cover commands for OSPF configuration.
Configuring OSPF basic functions
Network requirements
As shown in
B act as ABRs to forward routing information between areas.
After configuration, all switches can learn routes to every network segment in the AS.
Figure 38 Network diagram
Figure
38, all switches run OSPF. The AS is split into three areas, where Switch A and Switch
Use the command...
display ospf [ process-id ] abr-asbr [ | { begin |
exclude | include } regular-expression ]
display ospf [ process-id ] interface [ all |
interface-type interface-number ] [ | { begin |
exclude | include } regular-expression ]
display ospf [ process-id ] error [ | { begin |
exclude | include } regular-expression ]
display ospf [ process-id ] asbr-summary
[ ip-address { mask | mask-length } ] [ | { begin |
exclude | include } regular-expression ]
display router id [ | { begin | exclude | include }
regular-expression ]
reset ospf [ process-id ] counters [ neighbor
[ interface-type interface-number ] [ router-id ] ]
reset ospf [ process-id ] process [ graceful-restart ]
reset ospf [ process-id ] redistribution
99
Remarks
Available in user
view