HP 3600 v2 series Configuration Manual page 64

CAUTION:
If you specify null 0 interface as the output interface for a static route, do not specify the IP address of a
directly connected network as the destination IP address.
Verify the configuration.
5.
# Display the BFD session information of Switch A.
<SwitchA> display bfd session
Total Session Num: 1
Session Working Under Ctrl Mode:
LD/RD SourceAddr
6/3 192.168.1.1
# Display the RIP route 100.1.1.0/24 learned on Switch A.
<SwitchA> display ip routing-table 100.1.1.0 24 verbose
Routing Table : Public
Summary Count : 2
Destination: 100.1.1.0/24
Protocol: RIP
Preference: 100
IpPrecedence:
NextHop: 192.168.1.2
BkNextHop: 0.0.0.0
RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
BKTunnel ID: 0x0
State: Active Adv
Tag: 0
Destination: 100.1.1.0/24
Protocol: RIP
Preference: 100
IpPrecedence:
NextHop: 192.168.3.2
BkNextHop: 0.0.0.0
RelyNextHop: 0.0.0.0
Tunnel ID: 0x0
BKTunnel ID: 0x0
State: Inactive Adv
Tag: 0
# Enable RIP event debugging on Switch A.
<SwitchA> debugging rip 1 event
<SwitchA> terminal debugging
# When the link between Switch B and Switch C fails, Switch A quickly detects the link state change.
%Jan 19 10:41:51:203 2008 SwitchA BFD/4/LOG:Sess[192.168.1.1/192.168.2.2, Vlan-interface
100, Ctrl], Sta: UP->DOWN, Diag: 1
*Jan 19 10:41:51:203 2008 SwitchA RM/6/RMDEBUG: RIP-BFD: Message Type Disable, Connect
Type Indirect-connect, Pkt Type Control, Src IP Address 192.168.1.1, Src IFIndex 4, Nbr
IP Address 192.168.2.2.
Init Mode: Active
DestAddr State Holdtime Interface
192.168.2.2 Up
Process ID: 1
Cost: 1
QosLcId:
Interface: vlan-interface 100
BkInterface:
Neighbor : 192.168.1.2
Label: NULL
BKLabel: NULL
Age: 00h00m47s
Process ID: 2
Cost: 2
QosLcId:
Interface: vlan-interface 300
BkInterface:
Neighbor : 192.168.3.2
Label: NULL
BKLabel: NULL
Age: 00h12m50s
52
1700ms vlan100