Displaying And Maintaining Ospfv3; Ospfv3 Configuration Examples; Configuring Ospfv3 Areas - HP 6125XLG Configuration Manual

Displaying and maintaining OSPFv3

Execute display commands in any view.
Purpose
Display information about the routes to
OSPFv3 ABR and ASBR.
Display brief OSPFv3 process
information.
Display GR status of the specified
OSPFv3 process.
Display OSPFv3 interface information.
Display OSPFv3 LSDB information.
Display OSPFv3 neighbor information.
Display OSPFv3 request list
information.
Display OSPFv3 retransmission list
information.
Display OSPFv3 routing information.
Display OSPFv3 statistics.
Display OSPFv3 virtual link
information.

OSPFv3 configuration examples

Configuring OSPFv3 areas

Network requirements
As shown in
Enable OSPFv3 on all switches.
•
Split the AS into three areas.
•
Configure Switch B and Switch C as ABRs to forward routing information between areas.
•
Configure Area 2 as a stub area to reduce LSAs in the area without affecting route reachability.
•
Figure 76:
Command
display ospfv3 [ process-id ] abr-asbr
display ospfv3 [ process-id ] brief
display ospfv3 [ process-id ] graceful-restart status
display ospfv3 [ process-id ] interface [ interface-type
interface-number | verbose ]
display ospfv3 [ process-id ] lsdb [ { external | grace | inter-prefix |
inter-router | intra-prefix | link | network | router | unknown
[ type ] } [ link-state-id ] [ originate-router router-id | self-originate ] |
statistics | total ]
display ospfv3 [ process-id ] [ area area-id ] peer [ [ interface-type
interface-number ] [ verbose ] | peer-router-id | statistics ]
display ospfv3 [ process-id ] [ area area-id ] request-queue
[ interface-type interface-number ] [ neighbor-id ]
display ospfv3 [ process-id ] [ area area-id ] retrans-queue
[ interface-type interface-number ] [ neighbor-id ]
display ospfv3 [ process-id ] routing [ ipv6-address prefix-length ]
display ospfv3 [ process-id ] statistics
display ospfv3 [ process-id ] vlink
313