Bgp Configuration Task List - HP 3600 v2 series Configuration Manual

RFC 2439, BGP Route Flap Damping
•
• RFC 1997, BGP Communities Attribute
RFC 2796, BGP Route Reflection
•
RFC 3065, Autonomous System Confederations for BGP
•
• RFC 4271, A Border Gateway Protocol 4 (BGP-4)
RFC 5291, Outbound Route Filtering Capability for BGP-4
•
• RFC 5292, Address-Prefix-Based Outbound Route Filter for BGP-4
draft-ietf-idr-restart-08, Graceful Restart Mechanism for BGP
•

BGP configuration task list

Complete the following tasks to configure BGP:
Task
Configuring BGP basic
functions
Controlling route
generation
Controlling route
distribution and reception
Configuring BGP route
attributes
Creating a BGP connection
Specifying the source interface for TCP
connections
Allowing establishment of eBGP connection to an
indirectly connected peer or peer group
Injecting a local network
Configuring BGP route redistribution
Enabling default route redistribution into BGP
Configuring BGP route summarization
Advertising a default route to a peer or peer
group
Configuring BGP route distribution/reception
filtering policies
Enabling BGP and IGP route synchronization
Limiting prefixes received from a peer or peer
group
Configuring BGP route dampening
Configuring a shortcut route
Specifying a preferred value for routes received
Configuring preferences for BGP routes
Configure the default local preference
Configuring the MED attribute
Configuring the next hop attribute
Configuring the AS-PATH attribute
203
Remarks
Required
Optional
Optional
Required
Use at least one approach.
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional