HP 3600 v2 series Configuration Manual page 52

[SwitchB] rip 200
[SwitchB-rip-200] network 12.0.0.0
[SwitchB-rip-200] version 2
[SwitchB-rip-200] undo summary
[SwitchB-rip-200] quit
# Enable RIP 200 and specify RIP version 2 on Switch C.
<SwitchC> system-view
[SwitchC] rip 200
[SwitchC-rip-200] network 12.0.0.0
[SwitchC-rip-200] network 16.0.0.0
[SwitchC-rip-200] version 2
[SwitchC-rip-200] undo summary
# Display the routing table of Switch C.
[SwitchC] display ip routing-table
Routing Tables: Public
Destinations : 6
Destination/Mask
12.3.1.0/24
12.3.1.2/32
16.4.1.0/24
16.4.1.1/32
127.0.0.0/8
127.0.0.1/32
Configure route redistribution.
3.
# On Switch B, configure RIP 200 to redistribute direct routes and routes from RIP 100.
[SwitchB] rip 200
[SwitchB-rip-200] import-route rip 100
[SwitchB-rip-200] import-route direct
[SwitchB-rip-200] quit
# Display the routing table of Switch C.
[SwitchC] display ip routing-table
Routing Tables: Public
Destinations : 8
Destination/Mask
10.2.1.0/24
11.1.1.0/24
12.3.1.0/24
12.3.1.2/32
16.4.1.0/24
16.4.1.1/32
127.0.0.0/8
127.0.0.1/32
Configure an filtering policy to filter redistributed routes.
4.
# Define ACL 2000 and reference it to a filtering policy to filter routes redistributed from RIP 100 on
Switch B, making the route not advertised to Switch C.
[SwitchB] acl number 2000
Routes : 6
Proto Pre Cost
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
Routes : 8
Proto Pre Cost
RIP 100 1
RIP 100 1
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
Direct 0 0
40
NextHop Interface
12.3.1.2 Vlan200
127.0.0.1 InLoop0
16.4.1.1 Vlan400
127.0.0.1 InLoop0
127.0.0.1 InLoop0
127.0.0.1 InLoop0
NextHop Interface
12.3.1.1 Vlan200
12.3.1.1 Vlan200
12.3.1.2 Vlan200
127.0.0.1 InLoop0
16.4.1.1 Vlan400
127.0.0.1 InLoop0
127.0.0.1 InLoop0
127.0.0.1 InLoop0