Defining A Continue Clause; Displaying And Maintaining The Routing Policy - HP 3600 v2 series Configuration Manual

NOTE:
The difference between IPv4 and IPv6 apply clauses is the command for setting the next hop for routing
•
information.
The apply ip-address next-hop and apply ipv6 next-hop commands do not apply to redistributed IPv4
•
and IPv6 routes, respectively.

Defining a continue clause

Follow these steps to define a continue clause for a routing policy:
To do...
Enter system view
Create a routing policy and enter
routing policy view
Specify the next routing policy node
to be matched
NOTE:
• If you configure the same type of apply clauses that set different values (including the apply community
and apply extcommunity clauses with the additive keyword) on nodes that are combined by the
continue clause, the apply clause configured on the last matching node takes effect.
If you configure the apply community clause for multiple nodes that are combined by the continue
•
clause, the apply comm-list delete clause configured on the current node cannot delete the community
attributes of preceding nodes.

Displaying and maintaining the routing policy

To do...
Display BGP AS-PATH list
information
Display BGP community list
information
Display BGP extended community
list information
Display IPv4 prefix list statistics
Display IPv6 prefix list statistics
Use the command...
system-view
route-policy route-policy-name
{ deny | permit } node node-number
continue [ node-number ]
Use the command...
display ip as-path [ as-path-number ] [ | { begin |
exclude | include } regular-expression ]
display ip community-list
[ basic-community-list-number |
adv-community-list-number | comm-list-name ] [ |
{ begin | exclude | include } regular-expression ]
display ip extcommunity-list
[ ext-comm-list-number ] [ | { begin | exclude |
include } regular-expression ]
display ip ip-prefix [ ip-prefix-name ] [ | { begin |
exclude | include } regular-expression ]
display ip ipv6-prefix [ ipv6-prefix-name ] [ |
{ begin | exclude | include } regular-expression ]
369
Remarks
—
Required
Not created by default.
Optional
Not configured by default.
The node number specified must
be larger that the current node
number.
Remarks
Available in any
view