Displaying And Maintaining Pbr Configuration; Pbr Configuration (Using A Pbr Policy) - HP 3600 v2 series Configuration Manual

Applied globally—affects the traffic sent or received on all ports
•
• Applied to an interface—affects the traffic sent or received on the interface
Applied to a VLAN—affects the traffic sent or received on all ports in the VLAN
•
NOTE:
A QoS policy used for PBR applies only to traffic received on all ports, on an interface, or on all ports in
a VLAN.
Follow these steps to apply the QoS policy globally:
To do...
Enter system view
Apply the QoS policy globally
Follow these steps to apply the QoS policy to an interface:
To do...
Enter system view
Enter
interface
view or port
group view
Apply the policy to the interface or
port group
Follow these steps to apply the QoS policy to a VLAN:
To do...
Enter system view
Apply the QoS policy to VLANs
NOTE:
QoS policies cannot be applied to dynamic VLANs, for example, VLANs created by GVRP.

Displaying and maintaining PBR configuration

PBR configuration (using a PBR policy)

To do...
Display the PBR routing information
Use the command...
system-view
qos apply policy policy-name
global inbound
Use the command...
system-view
Enter interface interface interface-type
view interface-number
Enter port group port-group manual
view port-group-name
qos apply policy policy-name
inbound
Use the command...
system-view
qos vlan-policy policy-name vlan
vlan-id-list inbound
Use the command...
display ip policy-based-route [ | { begin |
exclude | include } regular-expression ]
383
Remarks
—
Required
Remarks
—
Use either command
Settings in interface view take
effect on the current interface;
settings in port group view take
effect on all ports in the port group.
Required
Remarks
—
Required
Remarks
Available in any view