Displaying And Maintaining Ospfv3 - HP FlexFabric 12900E Series Configuration Manual

Step
4. Enable BFD echo packet
mode for OSPFv3 FRR.

Displaying and maintaining OSPFv3

Execute display commands in any view and reset commands in user view.
Task
Display information about the routes
to OSPFv3 ABR and ASBR.
Display summary route information on
the OSPFv3 ABR.
Display summary route information on
the OSPFv3 ASBR.
Display OSPFv3 log information.
Display OSPFv3 process information.
Display OSPFv3 GR information.
Display OSPFv3 NSR information.
Display
information.
Display OSPFv3 LSDB information.
Display
information.
Display
information.
Display
information.
Display OSPFv3 retransmission list
information.
Display OSPFv3 routing information.
Display
information.
Display OSPFv3 statistics.
Display
information.
Restart an OSPFv3 process.
Restart OSPFv3 route redistribution.
Clear OSPFv3 statistics.
Clear OSPFv3 logs.
Command
ospfv3 primary-path-detect bfd
echo [ instance instance-id ]
OSPFv3 interface
OSPFv3 next hop
OSPFv3 neighbor
OSPFv3 request list
OSPFv3 topology
OSPFv3 virtual link
Command
display ospfv3 [ process-id ] abr-asbr
display ospfv3 [ process-id ] [ area area-id ] abr-summary
[ ipv6-address prefix-length ] [ verbose ]
display ospfv3 [ process-id ] asbr-summary [ ipv6-address
prefix-length ] [ verbose ]
display ospfv3 [ process-id ] event-log { lsa-flush | peer | spf }
display ospfv3 [ process-id ] [ verbose ]
display ospfv3 [ process-id ] graceful-restart [ verbose ]
display ospfv3 [ process-id ] non-stop-routing
display ospfv3 [ process-id ] interface [ interface-type
interface-number | verbose ]
display ospfv3 [ process-id ] lsdb [ { external | grace | inter-prefix
| inter-router | intra-prefix | link | network | nssa | router |
unknown [ type ] } [ link-state-id ] [ originate-router router-id |
self-originate ] | statistics | total | verbose ]
display ospfv3 [ process-id ] nexthop
display ospfv3 [ process-id ] [ area area-id ] peer [ [ interface-type
interface-number ] [ verbose ] | peer-router-id | statistics ]
display ospfv3 [ process-id ] [ area area-id ] request-queue
[ interface-type interface-number ] [ neighbor-id ]
display ospfv3 [ process-id ] [ area area-id ] retrans-queue
[ interface-type interface-number ] [ neighbor-id ]
display ospfv3 [ process-id ] routing [ ipv6-address prefix-length ]
display ospfv3 [ process-id ] [ area area-id ] spf-tree [ verbose ]
display ospfv3 [ process-id ] statistics [ error ]
display ospfv3 [ process-id ] vlink
reset ospfv3 [ process-id ] process [ graceful-restart ]
reset ospfv3 [ process-id ] redistribution
reset ospfv3 [ process-id ] statistics
reset ospfv3 [ process-id ] event-log [ lsa-flush | peer | spf ]
421
Remarks
By default, BFD echo packet mode
for OSPFv3 FRR is disabled.