Confirming The Operation By The Program - Mitsubishi A1SJ61BT11 User Manual

11 COMMUNICATION BETWEEN THE MASTER STATION AND THE
LOCAL STATION

11.3.2 Confirming the operation by the program

A62P A3NCPU AX41
X00
to
X1F
Terminal resistor
Using the sequence program, confirm that the data link is proceeding normally.
When M200 of the master station is turned on, M200 of the local station No.1 and
1
the local station No.2 are turned on.
When M0 of the local station No.1 is turned on, M0 of the master station and the
2
local station No.2 are turned on.
When M32 of the local station No.2 is turned on, M32 of the master station and the
3
local station No.1 are turned on.
When the data is written into D200 of the master station, it is stored in D200 of the
4
local station No.1 and station No.2.
When the data is written into D300 of the local station No.1, it is stored in D300 of
5
the master station and the local station No.2.
When the data is written into D304 of the local station No.2, it is stored in D304 of
6
the master station and the local station No.1.
Master station
AY41 AJ61 AX42 AY42
BT11
Y20 X/Y40 X60 YA0
to to to to
Y3F X/Y5F X9F YDF
Local station (station No.1:occupies 1 station)
A62P A3NCPU AJ61 AX40 AY40 AX41
BT11
X/Y00 X20 Y30 X40
to to to to
X/Y1F X2F Y3F X5F
Local station (station No.2:occupies 4 station)
A62P A3NCPU
11 - 13
MELSEC-A
AY41
Y60
to
Y7F
AJ61 AX40 AY40 AX41
BT11
X/Y00 X20 Y30 X40
to to to to
X/Y1F X2F Y3F X5F
Terminal resistor
AY41
Y60
to
Y7F