Mitsubishi A1SJ61BT11 User Manual page 128

6 PARAMETER SETTING
POINT
"Data link by buffer-memory parameters" is recommended for starting system debugging, and
"data link by E
Therefore, the number of steps in the operation program can be reduced (thus, shortens the
scan time).
(3) Internal memory
Data link is executed using the parameter information stored in the internal
memory.
When the module power is turned off, the parameters are erased.
PC CPU
SET YnA
TO
SET Yn8
SET Yn6
2
PROM parameters" is recommended for the operation after debugging.
The parameters
area erased
when the power
is turned off.
Buffer memory
Parameter
information area
6 - 2
MELSEC-A
Master station
Parameters are
not erased even
2
E PROM
if the power is
turned off.
Data link is
executed using
Internal memory
these parameter
information.