About Ver. 1.10 - Mitsubishi A1SJ61BT11 User Manual

2 SYSTEM CONFIGURATION

2.2.4 About Ver. 1.10

POINT
In a system where the modules of Ver. 1.00 and Ver. 1.10 are used together, the maximum
overall cable distance and station to station cable length are as specified for Ver. 1.00.
Refer to Section 3.2.1 for the maximum overall cable distance and station to station cable
length of Ver. 1.00.
The module of which the station to station cable length is uniformly 20cm or more by
improving the conventional limit of the station to station cable length is defined as
Ver.1.10.
The conventional modules are defined as Ver.1.00.
Refer to Section 3.2.2 for the maximum overall cable distance of Ver. 1.10.
The conditions for setting the station to station cable length uniformly to 20cm or more
are indicated below.
1) All modules configuring the CC-Link system must use
Version 1.10.
2) All data link cables must be Version 1.10 compatible CC-
Link dedicated cable.
(1) Checking Version 1.10
The "CC-Link" logo is stamped on the "plate" for the Version 1.10 modules.
(a) Rating plate of AJ61BT11
PROGRAMMABLE CONTROLLER
DATE
MADE IN JAPAN
(b) Rating plate of A1SJ61BT11
MODEL
POWER
DATE
MADE IN JAPAN
BD992C103H06
BD992C154H06
2 - 7
MELSEC-A
Relevant regulation
standards
Relevant regulation
standards