Mitsubishi A1SJ61BT11 User Manual page 175

8 PROGRAMMING
Number Name
SW0049 Temporary error invalid
(649 ) station request result
H
Temporary error invalid
SW004B
station canceling request
(64B )
H
result
SW004D
Line test request result
(64D )
H
SW004F Parameter setting test
(64F ) request result
H
SW0060
Mode setting switch status
(660 )
H
SW0061 Station number setting
(661 ) switch status
H
SW0062 Condition setting switch
(662 ) status
H
SW0064 No. of retries setting
(664 ) information
H
SW0065 No. of automatic return
(664 ) stations information
H
SW0066
Delay timer information
(666 )
H
SW0067
Parameter information
(667 )
H
SW0068
Host parameter status
(668 )
H
: Link special relay added to the function version B or later
Stores the execution results of the temporary error invalid station
request specification by SB0004.
0 : Normal
Other than 0 : Stores error code (Refer to Section 13.3.)
Stores the execution results of the temporary error invalid station
canceling request specification by SB0005.
0 : Normal
Other than 0 : Stores error code (Refer to Section 13.3.)
Stores the execution results of the line test request specification by
SB0008.
0 : Normal
Other than 0 : Stores error code (Refer to Section 13.3.)
Stores the execution results of the parameter setting test request by
SB0009.
0 : Normal
Other than 0 : Stores error code
Stores the setting status of the mode setting switch.
0: Online (remote net mode)
1: Online (remote I/O net mode)
2: Offline
3: Line test 1
4: Line test 2
5: Parameter verification test
6: Hardware test
Stores the station number setting switch's setting status.
0 : Master station
1 to 64 : Local station
The setting status of the condition setting switch (DIP switch) is
stored.
0: OFF
1: ON
b15 b8 b7 b6 b5 b4 b3 b2 b1 b0
0 to 0
Stores the number of retries setting information when responding to
an error.
1 to 7 (times)
Stores the number of automatic return stations setting information
during one link scan.
1 to 10 (modules)
Stores the delay time setting information.
The parameter information area to be used is stored.
1: Buffer memory (data link startup by Yn6)
2
2: E PROM (data link startup by Yn8)
Parameter setting status is stored.
0 : Normal
Other than 0 : Stores error code (Refer to Section 13.3.)
8 - 17
Description
SW1
SW2
SW3
SW4
SW5
SW6
SW7
SW8
MELSEC-A
Availability
( : available,
: not available )
Online
Offline
Master Local
station station