Mitsubishi A1SJ61BT11 User Manual page 172

8 PROGRAMMING
Number Name
Temporary error invalid
SB004B 1 station canceling complete
status
Line test acceptance
SB004C 1
status
SB004D 1 Line test complete status
Parameter setting test
SB004E 1
acceptance status
Parameter setting test
SB004F 1
complete status
SB0050 Offline test status
SB0060 Mode
SB0061 Station type
Standby master station
SB0062 1
setting
Input data status of a data
SB0065
link error station
SB0066
Number of occupied
stations
SB0067 2
SB0069 Module mode
SB006A Switch setting status
SB006D Parameter setting status
Host station operation
SB006E
status
Master station data link
SB0070 1
status
Standby master station
SB0071 1
information
1 : Link special relay added to the function version B or later
2 : Link special relay added to the AJ61BT11 of hardware version F or later and the A1SJ61BT11 of hardware version G or later
Table 8.1 Link special relay list (continued)
Indicates the acceptance complete status of the temporary error
invalid station canceling request instruction.
OFF : Not executed
ON : Temporary error invalid station canceling complete
Indicates the line test request acceptance status.
OFF : Not executed
ON : Specification accepted
Indicates the line test complete status.
OFF : Not completed
ON : Test complete
Indicates the parameter setting test request acceptance status.
OFF : Not accepted
ON : Specification accepted
Indicates the parameter ssetting test complete status.
OFF : Not completed
ON : Test complete
Indicates the offline-test execution status.
OFF : Not executed
ON : In progress
Indicates the module's mode setting switch setting status.
OFF : Online (0)
ON : Other than online (0)
Indicates the setting status of the module station number setting
switch.
OFF : Master station (station number 0)
ON : Local station (station numbers 1 to 64)
Indicates the setting status of the standby master station.
OFF : Not set
ON : Set
Indicates the setting status of the module's condition setting switch
(DIP switch) SW4.
OFF : Clear
ON : Keep
Indicates the setting of the module's condition setting switch (DIP
switch) SW5, SW6.
Number of
SB0066 (SW5)
occupied stations
1 station
2 stations
3 stations
4 stations
Indicates the setting status of the module's condition setting switch
(DIP switch) SW8. (Usable on AJ61BT11 and A1SJ61BT11)
OFF : Intelligent mode
ON : I/O mode
Indicates the switch setting status.
OFF : Normal
ON : Setting error exists (Store the error code in SW006A)
Indicates the parameter setting status.
OFF : Normal
ON : Setting error exists (Store the error code in SW0068)
Indicates the data link communication status with other stations.
OFF : In operation
ON : Not in operation
Indicates data link status.
OFF : Data link for master station
ON : Data link for waiting master station
Indicates whether there is standby master station or not.
OFF : Not present
ON : Present
8 - 14
Description
SB0067 (SW6)
OFF OFF
OFF ON
ON ON
ON OFF
MELSEC-A
Availability
( : available,
: not available )
Online
Offline
Master Local
station station