Procedure From Parameter Setting To Data Link Start - Mitsubishi A1SJ61BT11 User Manual

6 PARAMETER SETTING

6.1.2 Procedure from parameter setting to data link start

Data (number of connected
modules, number of retries, etc.)
is written to the master station's
"parameter information area
(address 0
memory.
By the data-link start request by
buffer-memory parameters (Yn6),
the contents of the "parameter
information area" in the buffer
memory is written to internal
memory. The data link is then
automatically started.
By the parameter registration
request to the E
the contents of the "parameter
information area" in the buffer
memory is written to E
By the data-link start request
from the E PROM parameter
(Yn8), the parameter information
stored in E PROM is transferred
to the internal memory.
Data link is then started
automatically.
Follow the procedure below:
to 5F )" in the buffer
H H
NO
2
PROM (YnA),
2
PROM.
2
2
PC CPU
Buffer memory
Parameter
information
TO
area
PC CPU
Buffer memory
Parameter
SET Yn6
information
area
Debug complete?
YES
PC CPU
Buffer memory
Parameter
SET YnA information
area
PC CPU
Buffer memory
Parameter
information
SET Yn8
area
6 - 3
MELSEC-A
Master station
2
E PROM
Internal
memory
Master station
2
E PROM
Internal
memory
Master station
2
E PROM
Internal
memory
Master station
2
E PROM
Internal
memory