NETGEAR MS510TX User Manual page 240

Table 56. Access profile configuration profile summary (continued)
Field
Mask
Priority
Remove an Access Control Profile
If you do not want to use an access control profile, you can deactivate it. However, if you no
longer need a profile, you can remove it entirely.

To remove an access profile:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security > Access > Access Control > Access Profile Configuration.
The Access Profile Configuration page displays.
6. Select the Remove Profile radio button.
7. Click the Apply button.
Your settings are saved.
Smart Managed Pro Switches MS510TX and MS510TXPP
Description
The subnet mask of the IP address.
The priority of the rule.
Manage Device Security
Access the Switch
240
on page 12.