NETGEAR MS510TX User Manual page 54

Smart Managed Pro Switches MS510TX and MS510TXPP
4. Enter the switch's password in the password field.
The default password is password. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays.
5. Select System > PoE > Basic > PoE Configuration.
The PoE Configuration page displays.
6. Select one of the following Power Limit Type radio buttons:
• Class. The maximum amount of power that can be delivered to a port is determined
by the class of the attached PD.
• User. The maximum amount of power that can be delivered to a port is determined by
the power limit settings for the port (see
on page 55). This is the default setting.
7. Select one of the following Detection Type radio buttons:
• IEEE 802 + Legacy. The ports support the IEEE 802.3at standard (PoE+), the IEEE
802.3af standard (PoE), and legacy PDs that require high-inrush current of more than
15W to power up. This is the default setting.
• IEEE 802. The ports support the IEEE 802.3at standard (PoE+) and the IEEE 802.3af
standard (PoE) but do not support legacy PDs.
8. Select one of the following Traps radio buttons:
• Disable. No PoE traps are generated. This is the default setting.
• Enable. PoE traps are generated if a PoE event occurs. PoE events could include
events such as a port starting or stopping providing PoE power or the switch reaching
a threshold power level.
9. Click the Apply button.
Your setting are saved.
The following table describes the nonconfigurable fields on the page.
Table 16. PoE Configuration fields
Field Description
Power Status The power status.
Nominal Power The maximum amount of power in watts that the switch can deliver to all ports.
Threshold Power If the consumed power is below the threshold power, the switch can power up another port.
The consumed power can be between the nominal and threshold power. The threshold
power is displayed in watts.
Consumed Power The total amount of power in watts that is being delivered to all ports.
Manage and View the PoE Port Configuration
Configure System Information
54