Remove A Static Ipv6 Route - NETGEAR MS510TX User Manual

If you do not know the IP address of the switch, see
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Routing> IPv6 > Basic > Route Table.
The Configure Routes page displays. The page also shows the IPv6 Route Table.
6. In the table in the Configure Routes section, select the check box for the static IPv6 route.
7. In the Preference field, specify another router preference.
8. Click the Apply button.
Your settings are saved.

Remove a Static IPv6 Route


To remove one or more static IPv6 routes:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Routing> IPv6 > Basic > Route Table.
The Configure Routes page displays. The page also shows the IPv6 Route Table.
6. In the table in the Configure Routes section, select the check boxes for the static IPv6
routes.
7. Click the Delete button.
The routes are removed from the switch.
Smart Managed Pro Switches MS510TX and MS510TXPP
Configure Routing
Access the Switch
Access the Switch
174
on page 12.
on page 12.