Manage An Individual Poe Port - NETGEAR GS316EP User Manual

Manage an individual PoE port

You can manage the settings on an individual PoE port.
To select a PoE port and configure the settings:
1. Open a web browser from a computer that is connected to the same network as the
switch, or connected directly to the switch through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
A login window opens.
3. Enter the device management password.
The password is the one that you specified the first time that you logged in. The
password is case-sensitive.
The HOME page displays.
4. Select POE.
The Power over Ethernet (PoE) page displays.
5. On the SETTING menu, open the menu for the port number.
The port settings display.
6. Click the EDIT button.
The PoE port options display.
7. Choose any of the following options to manage the PoE settings on the port:
a. Port Power.
• Enable: The port's ability to deliver PoE power is enabled. This is the default
setting.
• Disable: The port's ability to deliver PoE power is disabled.
b. Power Mode .
• 802.3af: The port is powered in, and limited to, the IEEE 802.3af mode. A
PD that requires IEEE 802.3at or IEEE 802.3bt power will not receive power
when IEEE 802.3af mode is selected.
• Legacy: The port is powered using high-inrush current, which is used by
legacy PDs that require more than 15W to power up.
• Pre-802.3at: The port is initially powered in the IEEE 802.3af mode and,
before 75 msec pass, changes to high power IEEE 802.3at mode. Select this
Maintain and Monitor the Switch
Gigabit Ethernet Plus Switches
96 User Manual