Manage The Certificate - NETGEAR MS510TX User Manual

Manage the Certificate

Use the Certificate Management page to manage the certificate. The switch can contain a
single certificate (or set of certificates.)
Generate a Certificate

To generate a certificate:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security > Access > HTTPS > Certificate Management.
The Certificate Management page displays. The page also shows the Certificate
Generation Status section.
6. Select the Generate Certificates radio button.
7. Click the Apply button.
The switch generates a certificate.
The Certificate Generation Status field shows progress information.
Import a Certificate

To import a certificate:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4. Enter the switch's password in the Password field.
Smart Managed Pro Switches MS510TX and MS510TXPP
Manage Device Security
Access the Switch
Access the Switch
233
on page 12.
on page 12.