View And Configure The Switch Management Settings; View Or Define System Information And View Software Versions - NETGEAR MS510TX User Manual

View and Configure the Switch Management Settings

This section describes how to display the switch status and specify some basic switch
information, such as the management interface IP address, system clock settings, and DNS
information. From the System > Management menu, you can access pages that are
described in the following sections:
•

View or Define System Information and View Software Versions

• View the System CPU Status
• View USB Device Information
• Configure the IPv4 Address for the Network Interface and Management VLAN
page 28
• Configure the IPv6 Address for the Network Interface
• View the IPv6 Network Neighbor
• Configure the Time Settings
• Configure DNS Settings
• Configure Green Ethernet Settings
View or Define System Information and View Software
Versions
When you log in, the System Information page displays. Use this page to configure and view
general device information such as system name, location, and contact, general system
temperature, temperatures of the fans, and boot and software versions.

To view or define system information and view software versions:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
Smart Managed Pro Switches MS510TX and MS510TXPP
on page 26
on page 27
on page 31
on page 32
on page 41
on page 45
Configure System Information
on page 30
Access the Switch
24
on page 24
on
on page 12.