NETGEAR MS510TX User Manual page 73

Smart Managed Pro Switches MS510TX and MS510TXPP
The following table describes the information that displays for all LLDP neighbors that
were discovered.
Field
MSAP Entry
Local Port
Chassis ID Subtype
Chassis ID
Port ID Subtype
Port ID
System Name
6. To view additional information about the remote device, click the hyperlink in the MSAP
Entry column.
A pop-up window displays information for the selected port.
The following table describes the information transmitted by the neighbor.
Field
Port Details
Local Port
MSAP Entry
Basic Details
Chassis ID Subtype
Chassis ID
Port ID Subtype
Port ID
Port Description
System Name
System Description
System Capabilities
Description
The Media Service Access Point (MSAP) entry number for the remote
device.
The interface on the local system that received LLDP information from a
remote system.
The type of data displayed in the Chassis ID field on the remote system.
The remote 802 LAN device's chassis.
The type of data displayed in the remote system's Port ID field.
The physical address of the port on the remote system from which the data
was sent.
The system name associated with the remote device. If the field is blank, the
name might not be configured on the remote system.
Description
The interface on the local system that received LLDP information from a
remote system.
The Media Service Access Point (MSAP) entry number for the remote device.
The type of data displayed in the Chassis ID field on the remote system.
The remote 802 LAN device's chassis.
The type of data displayed in the remote system's Port ID field.
The physical address of the port on the remote system from which the data
was sent.
The user-defined description of the port.
The system name associated with the remote device.
The description of the selected port associated with the remote system.
The system capabilities of the remote system.
Configure System Information
73