NETGEAR MS510TX User Manual page 250

4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security > Traffic Control > Port Security > Interface Configuration.
The Interface Configuration page displays.
6. Select which type of ports display onscreen:
• To display physical ports only, click the PORTS link.
• To display LAGs only, click the LAGS link.
• To display both physical ports and LAGs, click the All link.
7. Select one or more ports by taking one of the following actions:
• To configure a single port, select the check box associated with the port, or type the
port number in the Go To Interface field and click the Go button.
• To configure multiple ports with the same settings, select the check box associated
with each port.
• To configure all ports with the same settings, select the check box in the heading row.
8. Specify the following port security settings:
• Port Security. Enable or disable the port security feature for the selected ports. The
default is Disable.
• Max Allowed Dynamically Learned MAC. Specify the maximum number of
dynamically learned MAC addresses on the selected ports. The valid range is 0–128.
The default value is 128.
• Enable Violation Traps. Enable or disable the sending of new violation traps if a
packet with a disallowed MAC address is received. The default value is No, which
means that the option is disabled.
9. Click the Apply button.
Your settings are saved.
View Learned MAC Addresses and Convert Them to Static MAC Addresses
Use the Security MAC Address page to convert a dynamically learned MAC address to a
statically locked address.

To view learned MAC addresses for an individual interface or LAG and convert these
MAC addresses to static MAC addresses:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
Smart Managed Pro Switches MS510TX and MS510TXPP
Manage Device Security
250