NETGEAR MS510TX User Manual page 236

Create an Access Profile
Use the Access Profile Configuration page to set up a security access profile.

To configure an access profile:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security > Access > Access Control > Access Profile Configuration.
The Access Profile Configuration page displays. The page also shows the Profile
Summary section.
6. In the Access Profile Name field, enter a name for the access profile.
The maximum length is 32 characters.
7. Click the Apply button.
Your settings are saved.
By default, the new access profile is deactivated, that is, the Deactivate Profile radio
button is selected. The Profile Summary does not yet display any information for the
access profile because you did not yet add any access rules.
Add an Access Rule
After you create an access control profile, you must add on ore more security access rules to
the profile.

To add an access rule for an access profile:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Smart Managed Pro Switches MS510TX and MS510TXPP
Manage Device Security
Access the Switch
Access the Switch
236
on page 12.
on page 12.