NETGEAR MS510TX User Manual page 254

Configure Private VLAN Association Settings

To configure private VLAN association:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security > Traffic Control > Private Vlan > Private Vlan Association
Configuration.
The Private Vlan Association Configuration page displays.
6. From the Primary VLAN menu, select the primary VLAN ID of the domain.
You can select only a VLAN that you previously configured as a primary VLAN (see
Configure the Private VLAN Type
7. In the Secondary VLAN(s) field, enter the VLAN that you want to associate with the primary
VLAN.
You can specify statically created VLANs (excluding the primary and default VLANs).
You can associate a single, isolated VLAN and multiple community VLANs with the
selected primary VLAN.
8. Click the Apply button.
Your settings are saved.
Smart Managed Pro Switches MS510TX and MS510TXPP
on page 253).
Manage Device Security
Access the Switch
254
on page 12.