NETGEAR MS510TX User Manual page 229

This is the method that is used if the first method times out. If you select a method that
does not time out as the second method, the third method is not tried.
9. From the menu in the 3 column, select the authentication method, if any, that must be used
third in the selected authentication login list.
10. From the menu in the 4 column, select the method, if any, that must be used fourth in the
selected authentication login list.
This is the method that is used if all previous methods time out.
11. Click the Apply button.
Your settings are saved.
Configure an HTTPS Authentication List
Use the HTTPS Authentication List to configure the default login list for secure HTTP
(HTTPS).

To configure an HTTPS authentication list:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security > Management Security > Authentication List > HTTPS Authentication
List.
The HTTPS Authentication List page displays.
6. Select the check box for the httpsList name.
7. From the menu in the 1 column, select the authentication method that must be used first in
the selected authentication login list.
If you select a method that does not time out as the first method, such as Local or None,
you cannot configure a second and third method. If you configure another method and
then select Local or None as the first method, no other method is tried. User
authentication occurs in the order that the methods are selected. Possible methods are
as follows:
• Local. The user's locally stored ID and password are used for authentication. This is
the default method. Because the Local method does not time out, if you select this
Smart Managed Pro Switches MS510TX and MS510TXPP
Manage Device Security
Access the Switch
229
on page 12.