Validity-Date (Local User View); Radius Configuration Commands; Accounting-On Enable - HP 3600 v2 Series Command Reference Manual

validity-date (local user view)

Syntax
validity-date time
undo validity-date
View
Local user view
Default level
3: Manage level
Parameters
time: Validity
HH:MM:SS-YYYY/MM/DD, MM/DD/YYYY-HH:MM:SS, or YYYY/MM/DD-HH:MM:SS. HH:MM:SS
indicates the time, where HH ranges from 0 to 23, MM and SS range from 0 to 59. MM/DD/YYYY or
YYYY/MM/DD indicates the date, where YYYY ranges from 2000 to 2035, MM ranges from 1 to 12,
and the range of DD depends on the month. Except for the zeros in 00:00:00, leading zeros can be
omitted. For example, 2:2:0-201 1/2/2 equals to 02:02:00-201 1/02/02.
Description
Use the validity-date command to set the validity time of a local user.
Use the undo validity-date command to remove the configuration.
By default, a local user has no validity time and no time validity checking is performed.
When some users need to access the network temporarily, create a guest account and specify a validity
time and an expiration time for the account to control the validity of the account. When a user uses the
guest account for local authentication and passes the authentication, the switch checks whether the
current system time is between the validity time and the expiration time. If so, it permits the user to access
the network. Otherwise, it denies the access request of the user.
Related command: expiration-date.
Examples
# Set the validity time of user abc to 12:10:20 on April 30, 201 1, and the expiration time to 12:10:20 on
May 31, 201 1.
<Sysname> system-view
[Sysname] local-user abc
[Sysname-luser-abc] validity-date 12:10:20-2011/04/30
[Sysname-luser-abc] expiration-date 12:10:20-2011/05/31

RADIUS configuration commands

accounting-on enable

Syntax
accounting-on enable [ interval seconds | send send-times ] *
undo accounting-on enable
time of the local user, in the format
39
HH:MM:SS-MM/DD/YYYY,