HP 3600 v2 Series Command Reference Manual page 112

Configuration: Transmit Period
Quiet Period
Supp Timeout
Reauth Period
The maximal retransmitting times
EAD quick deploy configuration:
URL: http://192.168.19.23
Free IP: 192.168.19.0 255.255.255.0
EAD timeout:
The maximum 802.1X user resource number is 2048 per slot
Total current used 802.1X resource number is 1
Ethernet1/0/1 is link-up
802.1X protocol is enabled
Handshake is disabled
Handshake secure is disabled
802.1X unicast-trigger is enabled
Periodic reauthentication is disabled
The port is an authenticator
Authenticate Mode is Auto
Port Control Type is Mac-based
802.1X Multicast-trigger is enabled
Mandatory authentication domain: NOT configured
Guest VLAN: 4
Auth-fail VLAN: NOT configured
Max number of on-line users is 2048
EAPOL Packet: Tx 1087, Rx 986
Sent EAP Request/Identity Packets : 943
EAP Request/Challenge Packets: 60
EAP Success Packets: 29, Fail Packets: 55
Received EAPOL Start Packets : 60
EAPOL LogOff Packets: 24
EAP Response/Identity Packets : 724
EAP Response/Challenge Packets: 54
Error Packets: 0
1. Authenticated user : MAC address: 0015-e9a6-7cfe
Controlled User(s) amount to 1
Table 9 Output description
Field
Equipment 802.1X protocol is enabled
CHAP authentication is enabled
EAD quick deploy is enabled
Transmit Period
30 s, Handshake Period
60 s, Quiet Period Timer is disabled
30 s, Server Timeout
3600 s
30m
Description
Specifies whether 802.1X is enabled globally
Specifies whether CHAP authentication is enabled
Specifies whether EAD fast deployment is enabled
Username request timeout timer in seconds
102
15 s
100 s
3