HP 3600 v2 Series Command Reference Manual page 242

View
Any view
Default level
1: Monitor level
Parameters
brief: Displays brief information about all IPsec policies.
name: Displays detailed information about a specific IPsec policy or IPsec policy group.
policy-name: Name of the IPsec policy, a string of 1 to 15 characters.
seq-number: Sequence number of the IPsec policy, in the range of 1 to 65535.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display ipsec policy command to display information about IPsec policies.
If you do not specify any parameters, the command displays detailed information about all IPsec
policies.
If you specify the name policy-name combination but leave the seq-number argument, the command
displays detailed information about the specified IPsec policy group.
Related commands: ipsec policy (system view).
Examples
# Display brief information about all IPsec policies.
<Sysname> display ipsec policy brief
IPsec-Policy-Name
------------------------------------------------------------------------
aaa-1
IPsec-Policy-Name
------------------------------------------------------------------------
aaa-1
Table 34 Output description
Field
IPsec-Policy-Name
Mode
acl
ike-peer name
Mapped Template
Mode acl ike-peer name
manual
Mode acl
manual
Description
Name and sequence number of the IPsec policy separated by hyphen
Negotiation mode of the IPsec policy
Access control list (ACL) referenced by the IPsec policy
IKE peer name
Referenced IPsec policy template
232
Mapped Template
Local-Address Remote-Address