Ipsec Proposal - HP 3600 v2 Series Command Reference Manual

View
System view
Default level
2: System level
Parameters
policy-name: Name for the IPsec policy, a case-insensitive string of 1 to 15 characters. No minus sign (-)
can be included.
seq-number: Sequence number for the IPsec policy, in the range of 1 to 65535.
manual: Sets up SAs manually.
Description
Use the ipsec policy command to create an IPsec policy and enter its view.
Use the undo ipsec policy command to delete the specified IPsec policies.
By default, no IPsec policy exists.
When creating an IPsec policy, you must specify the generation mode.
You cannot change the generation mode of an existing IPsec policy; you can only delete the policy and
then re-create it with the new mode.
IPsec policies with the same name constitute an IPsec policy group. An IPsec policy is identified uniquely
by its name and sequence number. In an IPsec policy group, an IPsec policy with a smaller sequence
number has a higher priority.
The undo ipsec policy command without the seq-number argument deletes an IPsec policy group.
Related commands: display ipsec policy.
Examples
# Create an IPsec policy with the name policy1 and specify the manual mode for it.
<Sysname> system-view
[Sysname] ipsec policy policy1 101 manual
[Sysname-ipsec-policy-manual-policy1-101]

ipsec proposal

Syntax
ipsec proposal proposal-name
undo ipsec proposal proposal-name
View
System view
Default level
2: System level
Parameters
proposal-name: Name for the proposal, a case-insensitive string of 1 to 32 characters .
241