HP 3600 v2 Series Command Reference Manual page 113

Field
Handshake Period
Reauth Period
Quiet Period
Quiet Period Timer is disabled
Supp Timeout
Server Timeout
The maximal retransmitting times
EAD quick deploy configuration
URL
Free IP
EAD timeout
The maximum 802.1X user resource number
per slot
Total current used 802.1X resource number
Ethernet1/0/1 is link-up
802.1X protocol is disabled
Handshake is disabled
Handshake secure is disabled
802.1X unicast-trigger is disabled
Periodic reauthentication is disabled
The port is an authenticator
Authenticate Mode is Auto
Port Control Type is Mac-based
802.1X Multicast-trigger is enabled
Mandatory authentication domain
Guest VLAN
Auth-fail VLAN
Max number of on-line users
EAPOL Packet
Sent EAP Request/Identity Packets
EAP Request/Challenge Packets
Description
Handshake timer in seconds
Periodic online user re-authentication timer in seconds
Quiet timer in seconds
Status of the quiet timer. In this example, the quiet timer is
enabled.
Client timeout timer in seconds
Server timeout timer in seconds
Maximum number of attempts for sending an authentication
request to a client
EAD fast deployment configuration
Redirect URL for unauthenticated users using a web browser to
access the network
Freely accessible network segment
EAD rule timer in minutes
Maximum number of concurrent 802.1X user per card
Total number of online 802.1X users
Status of the port. In this example, Ethernet 1/0/1 is up.
Specifies whether 802.1X is enabled on the port
Specifies whether handshake is enabled on the port
Specifies whether handshake security is enabled on the port
Specifies whether unicast trigger is enabled on the port.
Specifies whether periodic online user re-authentication is
enabled on the port
Role of the port
Authorization state of the port
Access control method of the port
Specifies whether the 802.1X multicast-trigger function is
enabled
Mandatory authentication domain on the port
802.1X guest VLAN configured on the port. NOT configured is
displayed if no guest VLAN is configured.
Auth-Fail VLAN configured on the port. NOT configured is
displayed if no Auth-Fail VLAN is configured.
Maximum number of concurrent 802.1X users on the port
Number of sent (Tx) and received (Rx) EAPOL packets
Number of sent EAP-Request/Identity packets
Number of sent EAP-Request/Challenge packets
103